# Display Configuration

The Quectel Pi M1 smart control board provides two display interfaces, HDMI and MIPI DSI, allowing users to select the appropriate display solution according to different application requirements.

-  The HDMI interface supports external HDMI display devices, provides synchronized audio and video output, and supports hot plugging. 

-  The MIPI DSI interface is used to connect MIPI LCD displays. It is suitable for fixed-display scenarios such as embedded devices and industrial control applications, and does not support hot plugging. 

The locations of the display interfaces are shown in the figure below:

```{image} images/image_R0b4b5pg6oHYV0xvZ27cKqQBn1g.webp
:width: 708px
:height: 506px
:align: center
```

# MIPI Display Configuration

The Quectel Pi M1 supports connecting a MIPI LCD display through the onboard MIPI DSI interface.

The connection method is shown below:

```{image} images/image_EDTNbGea1os7E2x2v95cmImSnhe.webp
:width: 1535px
:height: 942px
:align: center
```

## System Settings - Display Settings

1.First, click the status area in the upper-right corner of the GNOME desktop, and then click “Settings”:

```{image} images/image_LvHDbsWOfoaWQOxd7EGchUq0n4g.webp
:width: 1280px
:height: 800px
:align: center
```

2.Click the “Displays” tab and modify the following settings:

```{image} images/image_ErQDbm8oLogmebxP6CvcG3TWnHd.webp
:width: 1280px
:height: 800px
:align: center
```

# HDMI Display Configuration

The Quectel Pi M1 provides a standard HDMI display interface, which can be connected to an external display using an HDMI cable.

The connection method is shown below:

```{image} images/image_CfXRbIMTEoJEjyxm0iCcn5bnn4c.webp
:width: 1448px
:height: 1086px
:align: center
```